Haventro

Free tile calculators
for US Homes

Tiles, boxes, grout and thinset for any floor, wall, shower or backsplash. Enter feet and inches. See the cuts before you buy.

Checked against manufacturer chartsFeet and inchesNo signup

Start with your tile job

Six calculators for every part of a tile project.

Pick your pattern, see the extra tile

The first six cover almost every US floor and wall. Tap one to calculate with it.

For 100 square feet you need

With 1/8" grout joints and 10% extra for a straight layout.

12" x 24" tile55 tilesabout 7 boxes of 8
12" x 12" tile108 tiles98 without extra
3" x 6" subway828 tiles753 without extra
Grout for 12" x 24"5.9 lbone 7 lb box covers it

Common US tile sizes, to scale

Bigger tile means fewer grout lines, but more careful cuts.

24" x 24"12" x 24"18" x 18"12" x 12"8" x 48" plank6" x 24" plank4" x 12"3" x 6" subway2" x 2" mosaicDrawn to scale: 1 inch = 4 px

Numbers you can check

Every result is tested against published data before a page goes live.

Checked against manufacturer charts

Grout and thinset results land within the coverage ranges printed by major US makers.

Built on US tile standards

Layout tips follow ANSI A108, like the 1/3 offset limit for tiles longer than 18".

Math shown on every page

Each calculator shows the formula and a step-by-step solution with your own numbers.

Plan your tile job in 2 minutes

Measure, pick a tile, get tiles, boxes, grout and thinset.

Start with tiles

Frequently asked questions

What does Haventro do?

Haventro has free calculators for tile projects only. They tell you how many tiles, boxes, grout and thinset you need for a floor, wall, shower or backsplash.

Are the calculators free?

Yes. Every calculator is free, needs no signup and runs in your browser.

How accurate are the results?

Tile counts use your exact measurements, the grout joint and an extra allowance for your layout. Grout and thinset results land within the ranges on manufacturer coverage charts. Always check your product label before you buy.

Can I use feet and inches?

Yes. Room sizes are entered in feet and inches and tile sizes in inches, the way tile is sold in the US.

In what order should I plan a tile job?

Measure the area, pick the tile and layout, work out tiles and boxes, then grout and thinset for the same tile.

Prajwal Karkera
Built and maintained by
Prajwal Karkera

Digital product specialist with 8+ years of building online tools. Every Haventro formula is shown on the page and checked against US tile and grout manufacturer charts and ANSI tile standards. How we build and check our tools